Water Foam Powder Fire Fighting Vehicles

These vehicles are designed for:
As universal vehicles serve for extinguishing the type “A”, “B”,”C”,”D” and “E” fires.
In these cases, for extinguishing fire, water, foam and dry powder are used.
Simultaneous use of powder and foam on fire, enable with this vehicle good extinguishing efficiency, in cases:

  • Extinguishing fire type “A”  fires of solid flammable materials (fires during which heated particles of wood, paper, straw, textile and coal are created etc.)
  • Extinguishing fire type “B”  flammable liquid fires (fires without heated particles, gasoline, oil, grease, lacquer, pitch, tar, etc.
  • Extinguishing fire type “C”  flammable gasses fires (city gas, acetylene, methane, propylene, butane etc.).
  • Extinguishing fire type “D”  flammable metals fires (aluminum, magnesium and they alloys, natrium, cilium and etc. )
  • Extinguishing fire type “E” - fires on equipment and installations under voltage, electro engine, transformers, generating stations and etc.)
  • Extinguishing fire from buildings in urban areas, military barracks, storages, chemical industry and industry for oil refineries.
  • Vehicles, with bigger amount of foam, are extinguishing fire in industrial areas individually, using hydrant pipeline.
  • Vehicles, with bigger amount of foam, are extinguishing fire in industrial areas individually, using hydrant pipeline.
  • In fire fighting installation mixer for water and foam is built-in, as well as port for foam extracting outside the vehicle.
  • light foam: - limited adjustable extinguishing substance for fire type “A”;
  • adjustable extinguishing substance for fire type “B” - flammable liquid fires   (fires without heated particles, gasoline, oil, grease, lacquer, pitch, tar, etc., and type “E” - fires on equipment and installations under voltage, electro engine, transformers, generating stations and etc.);
  • heavy foam: - limited adjustable extinguishing substance for fire type “A”;
  • adjustable extinguishing substance for fire type “B”

BCE powder  suitable for extinguishing fire type “B” and “C”, limited adjustable extinguishing substance for fire type “E”;
ABCE powder - suitable for extinguishing fire type “A”, “B” and “C”, limited adjustable extinguishing substance for fire type “E”;
ABCD powder - suitable for extinguishing fire type “A”, “B”, “C” and “D”, limited adjustable extinguishing substance for fire type “E”;


Carrying capacity of the chassis and propulsion capacity of the engine are things which define superstructure of firefighting vehicle:

  • single graded or more graded fire fighting centrifugal pumps can bee install  capacitate from 1600 to 6000 l/min under 8 bar pressure, and 400 l/min under 40 bar pressure and soaking altitude 7,5m.
  • water tank volume is from 3000 to 14000 l.
  • foam tank volume is from 200 to 9000l.
  • incorporation of powder module volume 250 to 2000 lit.
  • powder jet  for powder ejection into the fire, capacitate from 30 to 40 kg/sec. with 12 to 14 bar pressure, and jetted powder range around. 35m.
  • water/foam jet capacity of 1200 to 4500 l/min.
  • it is standard for all types of vehicles to have the vacuum water/foam mixers installed as well as the emergency winches and cabinet got the corresponding equipment with the Al-roll door, for fire extinguishing and protection of the firefighters. 

VPS-2000/200/200

Vehicle data: 
Chassis: MAN, Mercedes, Iveco, Volvo, Scania, DAF, Kamaz or other
Gross weight: 13t - 26t
Water tank volume:
3000l-7000l
Water tank material: GFK, S235J0, INOX
Foam tank volume: 300l-1000l
Foam tank material: GFK, INOX
Powder tank volume:
250-1000 kg
Boxes material: Al or INOX profile tubes
Firefighting pump:  Normal pressure: 1600l/min do 3000l/min; 10bar
High pressure: 1000/250l/min to 4000/400l/min; 10/40bar
Water or foam jet:  1200 l/min to 3000l/min constant or variable flow
Powder jet: 30kg/s-40kg/s, 12-14bar, range 35m
Winch: normal and/or high pressure
Pipe installation: hot zinc plated or INOX